tapered hole मीनिंग इन हिंदी

उदाहरण वाक्य

1. The bearing stud is tapered and threaded, and fits into a tapered hole in the steering knuckle.
2. The geometry produced by lathe boring is usually of two types : straight holes and tapered holes.
3. The holes are even and non-conical, so however it was done, it was not by using another shark's tooth, which would have left a tapered hole.
4. The tapered hole bored through the body is about 4 cm in diameter on the back; at the front it is about 10 cm in diameter.
5. For light loads ( such as encountered by a lathe tailstock or a drill press ), tools with self-holding tapers are simply slipped onto or into the spindle; the pressure of the spindle against the workpiece drives the tapered shank tightly into the tapered hole.
6. A pilot hole for a flat head screw actually consists of three different size holes : the pilot hole for the threaded part; a larger diameter hole for the smooth, unthreaded shank of the screw; and the countersunk tapered hole at the top for the head of the screw.
7. The tailpiece anchors the strings to the lower bout of the violin by means of the tailgut, which loops around an ebony button called the tailpin ( sometimes confusingly called the " endpin ", like the cello's spike ), which fits into a tapered hole in the bottom block.